i was looking at A/C bypass pullies and they only have 1 for the 2.2L, i have a 2.4L Z24, also the belt connects only the alternator, the compressor, and the crankshaft so i dont see how i could put a smaller belt on and bypass the compressor. (look at fig. 8 on this site) http://www.autozone.com/servlet/UiBroker?ForwardPage=az/cds/en_us/0900823d/80/19/12/40/0900823d80191240.jsp what should i do? fixing the compressor isnt an option, too expencive.
wouldent running a smaller belt cause the belt tor rub at the tentioner?

i want to build a portable gas powered air compressor ( i have already buildt a 60g 110v air compressor for home that works just fine no problems). on regular compressor you plug them inick,turn on the switch and thats it. compressor starts shuts off at regulated psi. while using compressor, pump and starter cuts in at regulated psi. by itself repetes over to keep regulated psi in tank. well if tou have to pull a draw string to start a gas powered compressor and it starts compressing air. what happens when it reaches desired psi or when pressure drops and has to fill up again. do i have to manually start this thing every timepsi gets psi gets low ? or how does it start again without me having to manualy start it? or does it stay running all the time? do i need any special or different valves or something? or just HOW DOES IT WORK?

Having trouble with air conditioner? It is running but with a very low flow of air. Sure enough, I go outside and the air compressor isn’t running.

Any suggestions on what i should be looking for as I try to fix it.

i want to build a portable gas powered air compressor ( i have already buildt a 60g 110v air compressor for home that works just fine no problems). on regular compressor you plug them inick,turn on the switch and thats it. compressor starts shuts off at regulated psi. while using compressor, pump and starter cuts in at regulated psi. by itself repetes over to keep regulated psi in tank. well if tou have to pull a draw string to start a gas powered compressor and it starts compressing air. what happens when it reaches desired psi or when pressure drops and has to fill up again. do i have to manually start this thing every timepsi gets psi gets low ? or how does it start again without me having to manualy start it? or does it stay running all the time? do i need any special or different valves or something? or just HOW DOES IT WORK?

i want to build a portable gas powered air compressor ( i have already buildt a 60g 110v air compressor for home that works just fine no problems). on regular compressor you plug them inick,turn on the switch and thats it. compressor starts shuts off at regulated psi. while using compressor, pump and starter cuts in at regulated psi. by itself repetes over to keep regulated psi in tank. well if tou have to pull a draw string to start a gas powered compressor and it starts compressing air. what happens when it reaches desired psi or when pressure drops and has to fill up again. do i have to manually start this thing every timepsi gets psi gets low ? or how does it start again without me having to manualy start it? or does it stay running all the time? do i need any special or different valves or something? or just HOW DOES IT WORK?

is it any difference when u use it while the engine still running?

My compressor will fill the tank and then after running some air out it goes to re start and the motor just hums. It is does not require oil. Any ideas?